China Durable High-Quality Powder Verge Flail Mower Pto Drive for Tractor pto shaft extension

Product Description

 Product Technical specs:

Model EFGC-105M EFGC-115M EFGC-125M EFGC-135M EFGC-145M
Framework Bodyweight 250kg 265kg 277kg 292kg 317kg
Operating Width 1571mm 1120mm 1220mm 1320mm 1420mm
PTO Turning Velocity 540r/min 540r/min 540r/min 540r/min 540r/min
Flail Variety Y Blade / Hammer
Amount Of Flails Hammer 18/ Y Blade 36 Hammer eighteen/ Y Blade 36 Hammer eighteen/ Y Blade 36 Hammer 22 / Y Blade forty four Hammer 22 / Y Blade 44
Tractor HP 18-25hp 18-25hp 18-25hp twenty-30hp thirty-35hp

Design EFGC-155M EFGC-165M EFGC-175M EFGC-185M EFGC-195M
Composition Bodyweight 332kg 347kg 359kg 385kg 412kg
Functioning Width 1520mm 1620mm 1720mm 1820mm 1920mm
PTO Turning Pace 540r/min 540r/min 540r/min 540r/min 540r/min
Flail Type Y Blade / Hammer
Quantity Of Flails Hammer 22 / Y Blade forty four Hammer 24/ Y Blade 48 Hammer 26 / Y Blade fifty two Hammer: 32 / Y Blade: 64 Hammer: 32 / Y Blade: sixty four
Tractor HP thirty-40hp 35-45hp 40-50hp forty five-85hp 45-85hp

Our Description:

one. Adjustable to fulfill a variety of peak specifications
2. Deck plate thickness 5/32inch (4mm)
3. Facet plate thickness fifteen/64inch (6mm)
four. 3-PTO shear pin shaft group 1 & 2 hookup
5. Sturdy large-high quality powder spray portray

Our Advantages:

A  complete total set of creation products guide to  short  lead time and greater rates of device.

Assure 1 12 months guarantee of all our goods.

Produce devices according to any needs from our clients.

New equipment will be developed  each 12 months.

Every single design of our device will be tested prior to the shipping to the port.

If you want to visit our manufacturing facility, our boss will give you a very best reception.

FAQ:

Q1:What is your direct time?

A:Normally, it will consider forty days to make 1 40HQ container after obtaining your advance payment. If you want earlier, we can do relies upon on your get.

Q2:What is your phrases of payment?
A: T/T 30% as deposit,and 70% balance ahead of shipping and delivery or towards duplicate of B/L.

Q3:Could you make some equipment we want?
A: If you can supply technological drawings, that is no dilemma for us.

This autumn:Will you test devices before delivery?
A: Of course. We will decide 1 sample of every single product to take a look at and affirm no problem ahead of shipping and delivery.

Q5: Could i use our emblem on the machines i purchased?
A: Of system, why not? We settle for OEM and we also do our brand. If you want to signify our brand, we also welcome.

Q6:May i be the exceptional agent of some machines you market in our place?
A: No difficulty. But you need to have to reach the quantity we call for 1 12 months.
 

US $450-800
/ Piece
|
10 Pieces

(Min. Order)

###

After-sales Service: Within 1 Hour
Warranty: 1 Year
Certification: CE
Application: Paddy Field, Fruit Tree, Tea Tree, Lawn, Farmland
Cutting Height: 10-80mm
Cutting Width: 2100mm

###

Customization:

###

Model EFGC-105M EFGC-115M EFGC-125M EFGC-135M EFGC-145M
Structure Weight 250kg 265kg 277kg 292kg 317kg
Working Width 1020mm 1120mm 1220mm 1320mm 1420mm
PTO Turning Speed 540r/min 540r/min 540r/min 540r/min 540r/min
Flail Type Y Blade / Hammer
Number Of Flails Hammer 18/ Y Blade 36 Hammer 18/ Y Blade 36 Hammer 18/ Y Blade 36 Hammer 22 / Y Blade 44 Hammer 22 / Y Blade 44
Tractor HP 18-25hp 18-25hp 18-25hp 20-30hp 30-35hp

###

Model EFGC-155M EFGC-165M EFGC-175M EFGC-185M EFGC-195M
Structure Weight 332kg 347kg 359kg 385kg 412kg
Working Width 1520mm 1620mm 1720mm 1820mm 1920mm
PTO Turning Speed 540r/min 540r/min 540r/min 540r/min 540r/min
Flail Type Y Blade / Hammer
Number Of Flails Hammer 22 / Y Blade 44 Hammer 24/ Y Blade 48 Hammer 26 / Y Blade 52 Hammer: 32 / Y Blade: 64 Hammer: 32 / Y Blade: 64
Tractor HP 30-40hp 35-45hp 40-50hp 45-85hp 45-85hp
US $450-800
/ Piece
|
10 Pieces

(Min. Order)

###

After-sales Service: Within 1 Hour
Warranty: 1 Year
Certification: CE
Application: Paddy Field, Fruit Tree, Tea Tree, Lawn, Farmland
Cutting Height: 10-80mm
Cutting Width: 2100mm

###

Customization:

###

Model EFGC-105M EFGC-115M EFGC-125M EFGC-135M EFGC-145M
Structure Weight 250kg 265kg 277kg 292kg 317kg
Working Width 1020mm 1120mm 1220mm 1320mm 1420mm
PTO Turning Speed 540r/min 540r/min 540r/min 540r/min 540r/min
Flail Type Y Blade / Hammer
Number Of Flails Hammer 18/ Y Blade 36 Hammer 18/ Y Blade 36 Hammer 18/ Y Blade 36 Hammer 22 / Y Blade 44 Hammer 22 / Y Blade 44
Tractor HP 18-25hp 18-25hp 18-25hp 20-30hp 30-35hp

###

Model EFGC-155M EFGC-165M EFGC-175M EFGC-185M EFGC-195M
Structure Weight 332kg 347kg 359kg 385kg 412kg
Working Width 1520mm 1620mm 1720mm 1820mm 1920mm
PTO Turning Speed 540r/min 540r/min 540r/min 540r/min 540r/min
Flail Type Y Blade / Hammer
Number Of Flails Hammer 22 / Y Blade 44 Hammer 24/ Y Blade 48 Hammer 26 / Y Blade 52 Hammer: 32 / Y Blade: 64 Hammer: 32 / Y Blade: 64
Tractor HP 30-40hp 35-45hp 40-50hp 45-85hp 45-85hp

The Different Parts of a PTO Shaft

Power Take-Off (PTO) shafts are an integral part of a tractor’s driveline. Without them, a tractor cannot operate. It is essential to understand the different parts of a PTO shaft, as they are crucial for the operation of your tractor. These parts are typically overlooked during routine tractor maintenance checks, but knowing more about them will help you practice on farm machinery better.

Tractor’s power take-off (PTO) shaft

Shaft CollarA Tractor’s power take-off (or PTO) shaft transfers power from the tractor to an implement. These shafts typically rotate at speeds between 540 and 1000 rpm. A number of safety features help prevent accidental contact between the shaft and the implement.
In order to avoid this problem, tractor operators should be vigilant while operating their tractors. They should make sure that the tractor’s power take-off (PTO) shaft is shielded. These shields include a master shield for the PTO stub, a PTO integral journal shield, and an implement input connection shield. The PTO master shield is mounted on the tractor and extends over the PTO stub on three sides. It is designed to prevent collisions between the tractor and any connected machine drive shaft.
A power take-off (PTO) shaft is an important component on any tractor. It is a shaft that transmits mechanical power from a tractor to an implement or separate machine. Early PTOs used a transmission and were located at the rear of the tractor. They are now available with hydraulic or mechanical drivelines. These power take-offs transfer the tractor’s power to a secondary piece of equipment through a driveshaft.
Proper PTO shaft guards protect people from stepping on rotating shafts. The PTO should not compress fully at any point in the operating range. It should have several inches of overlap at the maximum operating extension. A PTO guard should be positioned properly for each machine.
Despite these benefits, there are still many risks associated with PTO shafts. These powerful and potentially dangerous pieces of machinery can cause severe injury if not used safely. Luckily, proper installation of safety shields can reduce the risk of injury.

Types

PTO shafts come in a variety of different shapes, sizes, and materials. The most common types are square and round, but there are also star-shaped and trilobed types. While the star-shaped type is a typical North American design, the trilobed and lemon-shaped varieties are typically German or Italian. Typically, the lemon-shaped ones are made of an alloy called ‘Lemon Yellow.’ In some cases, the shaft will come with snap rings.
Different manufacturers use various materials for their PTO shafts. The tube of a welded drive shaft must be strong enough to handle the force exerted by the PTO. There are many different materials available, but some are stronger than others. Before choosing the type of drive shaft that is right for your machine, make sure that you know the exact measurements of your driveline.
When deciding between different types of PTO shafts, you must also consider the materials that will be used for your particular application. While splines are the most common material for PTO shafts, you can find various types that have different uses. Carbon steel is malleable and has a low carbon content, which makes it more reliable. A ferrous steel is more durable and contains metals like nickel, chromium, and molybdenum, which make it a great alternative to carbon steel.
A PTO gearbox input shaft extends between the PTO gearbox and the PTO clutch. It is mounted with a toothed wheel 8. An inductive sensor 9 on the shaft outputs a pulsed electronic signal based on the rotational speed of the shaft. These pulsed signals are called inductive speed sensors.

Rotation direction

The PTO shaft is a critical part of the power take-off of a farm tractor. It allows the tractor to transfer power from the engine to an implement such as a mower or other garden equipment. The rotation direction of the PTO shaft depends on the type of implement. Some implements only accept rotation in one direction, while others require rotation in both directions.

Safety chain

Shaft CollarOne of the best ways to protect your PTO shaft is to use a safety chain. A safety chain is a chain that is attached to the PTO shaft, and it prevents the plastic shield from spinning on the shaft. This chain should be fastened to a suitable point on your machine or tractor. It should not be attached to the lower lift arms or the U-guard.
PTO shafts can be very dangerous if they are not guarded. They can rotate as high as 1000 rpm and could seriously injure you. It is also important to ensure that the PTO shaft guard is fitted correctly, and that the tractor is turned off before working on it. In addition, avoiding wearing loose clothing when working around a PTO shaft can help protect your life.
Another way to protect the PTO shaft is to shield the IID shaft. This can be done by using shielding over the straight part of the shaft, the PTO connection, or the Implement Input Connection. A protruding bolt or pin can catch clothing and snag it. If not shielded, the clothing can wrap around the shaft, trapping the person against it.
A good safety chain should be positioned between the tractor and the PTO shaft. The chain should be at least 50 mm wider than the PTO shaft, and should be in good condition. It should cover the entire length of the PTO shaft from the tractor to the first bearing. The PTO shaft must also be fitted with the correct bearing ring. It is also vital to ensure that the PTO guard does not bend or break, as this could result in damage to the PTO shaft.

Shield

Shaft CollarA PTO shaft shield protects the PTO shaft from possible impacts. It is typically made of plastic, but can also be made of metal. These shields are easy to damage, and are therefore preferably made of a durable material. The shields are held in place with brackets. The shields are made with two parts: an inner shield and a protective sleeve.
An improvement to the PTO shaft shield is a bracket that supports both the outer and PTO shaft. It is shown in conjunction with a towed machine in FIGS. 2 and 7. FIG. 7 is a side elevation of the bracket mounted to the tongue of the machine. This shield is designed to prevent the PTO shaft from becoming damaged during the towed process.
The main risk associated with PTO mishaps is entanglement, which can result in serious injuries. If a shaft separates from a tractor, it can strike nearby workers or people. Proper maintenance can minimize the risk of entanglement and save lives. Thankfully, equipment manufacturers have made huge strides in reducing the risk of these accidents. Operators should always make sure that the PTO shaft shield is in place to avoid the risk of entanglement.
In addition to preventing entanglement, a PTO shaft shield also helps protect the universal joints that are mounted on the PTO shaft. The shield is made of plastic or steel. It is typically shaped like an inverted U and covers both the top and sides of the shaft. A detachable PTO shaft shield is also available.
As with all parts of a PTO driveline, the PTO shaft shield should be maintained to prevent damage to the bearings. It is necessary to inspect the shield and replace it whenever it becomes damaged. PTO equipment is often used outdoors, and it is frequently exposed to crop debris, rust, and dirt that can affect the bearings. Proper maintenance will extend the equipment’s lifespan and reduce maintenance costs.
China Durable High-Quality Powder Verge Flail Mower Pto Drive for Tractor     pto shaft extensionChina Durable High-Quality Powder Verge Flail Mower Pto Drive for Tractor     pto shaft extension
editor by czh 2023-01-03