China Factory Custom OEM Forland 3000L 4000L Septic Suction Truck Price From China pto shaft clutch

Solution Description

Factory Customized OEM Forland 3000L 4000L Septic suction truck price from China  

I. Information of Factory Personalized OEM Forland 3000L 4000L Septic suction truck cost from China

Perform:

(1)Vacuum sewage suction truck (also known as truck mounted sewage cleaner,vacuum cleaner truck ,vacuum suction truck ,vacuum suction tanker ,vacuum waste assortment truck ,sewage suction truck,sewage vacuum truck ,waste vacuum truck ,sewer truck ,cesspit emptier ,gully emptier,and many others.) is used to acquire, transportation and discharge liquid this kind of as dirty water,sludge,septic,crude oil and solid things this kind of as modest stones,bricks as effectively.It is suitable for cleaning the sewer,cesspit,gully ,etc. It is extensively employed in setting and sanitation discipline.

(2)Accessory of sewage suction function :Equipped with PTO, transmission shaft, vacuum suction sewage pump, high pressure molding tank, moisture separator, gas-oil separation, a number of directional management valve, hanger rod, self-discharging valve, suck fecal gun and pipe community method.

(3)vacuum tank capacity ranges from 3,000 Liters to 22,000 liters 

Functions:

a.Cylinder vacuum tank can be lifted hydraulically to 40-45 degree.Rear doorway can be opened and closed hydraulically.

 

b.Undertake EU vacuum pump (Italy brand) or equal China top model double vacuum pumps,super strong,hugely productive.

 

c.Pump can be operated by a hydraulic motor or by an auxiliary motor.

 

d.Overfill method with audio CZPT is equipped ,stopping the vacuum pump hurt from sewage water into vacuum pump when the tank is entire.

 

e.Nice form ,rational framework,sturdy and long service existence

II. Technical data of Factory Custom made OEM Forland 3000L 4000L Septic suction truck price from China
 

 

3 CU.M SEWAGE SUCTION TRUCK Physique QUOTATION
The parameters of Tank Physique
Quantity of water tank 3,000L 
Material of tanker Q235 steel , 6 mm thickness 
Suction pipe  4″ diameter 
Check out window  1 pcs on rear cover 
Every single aspect of tank insert hose platform  Aluminum alloy checkered plate 
Tank filling velocity ≤5min Sucking depth ≥6m
Tank Tipping strategy and angle By  hydraulic cylinders 
Rear door  Open and shut by hydraulic cylinders 
Standard configuration sub body,vacuum sewage tank,oil water separator, h2o gas separator, hydraulic cylinder for unloading unit,  vacuum pump, pressure gauge,suction hose, gravity movement valve, linked unit,observation tube, automatic anti overflow valve, hydraulic suite,rear doorway hydraulic opening
Vacuum pump  Brand /Design PN45D( Authentic country :Italy )
Pump type Air cooled vaccum pump
Maximum force 1.5 bar
Power 5.8kw
Maximum vacuum fee 92%
Flowing velocity 5.3m3/h
Maximum rotating velocity 1300 rpm 

III. VACUUM JETTING SEAGE SUCTION TRUCK Operating Overall performance

V. VACUUM SEWAGE SUCTION TRUCK WORKMANSHOP


VI. More Decision OF VACUUM SEWAGE SUCTION TRUCK FOR YOUR REFERENCE.

VII. Shipping and delivery:RORO/BULK VESSEL/CONTAINER 
  
RORO: The truck is pushed to the ship inside of straight and fastened effectively. It can safeguard the truck being rusty and damaged throughout shipping.

BULK:  The truck is lifted by crane then set on the vessel deck. This model is significantly less expensive.

CONTAINER: The truck is set into the container. This design is used for small design trucks

VIII. ABOUT US  

CLW Group  is an licensed particular truck manufacturer which has a lot of many years in design ,solution ,product sales and support in particular vehicles like as boom truck , fire truck, manlift truck, tank truck , rubbish truck, tipper truck , wrecker truck , refrigerated truck and etc. Principal data as below:

(1) More than five hundred staff, large and sophisticated production 
(2) twenty five expert engineers, can offer you the greatest and most affordable layout
(3) Develop stringent QC group to ensure the good quality
(4) 1 yr or 30,000km guarantee which arrives 1st.
(5) 1 set of spare components of chassis presented which will support you save money on routine maintenance. 
(6) Give technological assist and right after serive for existence.
(7) Specialist income group which will assist you to pick ideal truck.

Welcome to make contact with with us for more details. We will offer you you the ideal truck as we can .

 

US $9,500-15,500
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: 7X 24 Hours Online
Warranty: 12 Months
Certification: ISO9000, CCC, TS16949, EPA, EEC, RoHS, CE
Emission Standard: Euro 2, Euro 3, Euro 4, Euro 5
Payload: 3ton-5ton
Transmission Type: Manual

###

Customization:

###

3 CU.M SEWAGE SUCTION TRUCK BODY QUOTATION
The parameters of Tank Body
Volume of water tank 3,000L 
Material of tanker Q235 steel , 6 mm thickness 
Suction pipe  4" diameter 
View window  1 pcs on rear cover 
Each side of tank add hose platform  Aluminum alloy checkered plate 
Tank filling speed 5min Sucking depth 6m
Tank Tipping method and angle By  hydraulic cylinders 
Rear door  Open and closed by hydraulic cylinders 
Standard configuration sub frame,vacuum sewage tank,oil water separator, water gas separator, hydraulic cylinder for unloading device,  vacuum pump, pressure gauge,suction hose, gravity flow valve, connected device,observation tube, automatic anti overflow valve, hydraulic suite,rear door hydraulic opening
Vacuum pump  Brand /Model PN45D( Original country :Italy )
Pump type Air cooled vaccum pump
Maximum pressure 1.5 bar
Power 5.8kw
Maximum vacuum rate 92%
Flowing speed 5.3m3/h
Maximum rotating speed 1300 rpm 
US $9,500-15,500
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: 7X 24 Hours Online
Warranty: 12 Months
Certification: ISO9000, CCC, TS16949, EPA, EEC, RoHS, CE
Emission Standard: Euro 2, Euro 3, Euro 4, Euro 5
Payload: 3ton-5ton
Transmission Type: Manual

###

Customization:

###

3 CU.M SEWAGE SUCTION TRUCK BODY QUOTATION
The parameters of Tank Body
Volume of water tank 3,000L 
Material of tanker Q235 steel , 6 mm thickness 
Suction pipe  4" diameter 
View window  1 pcs on rear cover 
Each side of tank add hose platform  Aluminum alloy checkered plate 
Tank filling speed 5min Sucking depth 6m
Tank Tipping method and angle By  hydraulic cylinders 
Rear door  Open and closed by hydraulic cylinders 
Standard configuration sub frame,vacuum sewage tank,oil water separator, water gas separator, hydraulic cylinder for unloading device,  vacuum pump, pressure gauge,suction hose, gravity flow valve, connected device,observation tube, automatic anti overflow valve, hydraulic suite,rear door hydraulic opening
Vacuum pump  Brand /Model PN45D( Original country :Italy )
Pump type Air cooled vaccum pump
Maximum pressure 1.5 bar
Power 5.8kw
Maximum vacuum rate 92%
Flowing speed 5.3m3/h
Maximum rotating speed 1300 rpm 

The Different Parts of a PTO Shaft

Power Take-Off (PTO) shafts are an integral part of a tractor’s driveline. Without them, a tractor cannot operate. It is essential to understand the different parts of a PTO shaft, as they are crucial for the operation of your tractor. These parts are typically overlooked during routine tractor maintenance checks, but knowing more about them will help you practice on farm machinery better.

Tractor’s power take-off (PTO) shaft

Shaft CollarA Tractor’s power take-off (or PTO) shaft transfers power from the tractor to an implement. These shafts typically rotate at speeds between 540 and 1000 rpm. A number of safety features help prevent accidental contact between the shaft and the implement.
In order to avoid this problem, tractor operators should be vigilant while operating their tractors. They should make sure that the tractor’s power take-off (PTO) shaft is shielded. These shields include a master shield for the PTO stub, a PTO integral journal shield, and an implement input connection shield. The PTO master shield is mounted on the tractor and extends over the PTO stub on three sides. It is designed to prevent collisions between the tractor and any connected machine drive shaft.
A power take-off (PTO) shaft is an important component on any tractor. It is a shaft that transmits mechanical power from a tractor to an implement or separate machine. Early PTOs used a transmission and were located at the rear of the tractor. They are now available with hydraulic or mechanical drivelines. These power take-offs transfer the tractor’s power to a secondary piece of equipment through a driveshaft.
Proper PTO shaft guards protect people from stepping on rotating shafts. The PTO should not compress fully at any point in the operating range. It should have several inches of overlap at the maximum operating extension. A PTO guard should be positioned properly for each machine.
Despite these benefits, there are still many risks associated with PTO shafts. These powerful and potentially dangerous pieces of machinery can cause severe injury if not used safely. Luckily, proper installation of safety shields can reduce the risk of injury.

Types

PTO shafts come in a variety of different shapes, sizes, and materials. The most common types are square and round, but there are also star-shaped and trilobed types. While the star-shaped type is a typical North American design, the trilobed and lemon-shaped varieties are typically German or Italian. Typically, the lemon-shaped ones are made of an alloy called ‘Lemon Yellow.’ In some cases, the shaft will come with snap rings.
Different manufacturers use various materials for their PTO shafts. The tube of a welded drive shaft must be strong enough to handle the force exerted by the PTO. There are many different materials available, but some are stronger than others. Before choosing the type of drive shaft that is right for your machine, make sure that you know the exact measurements of your driveline.
When deciding between different types of PTO shafts, you must also consider the materials that will be used for your particular application. While splines are the most common material for PTO shafts, you can find various types that have different uses. Carbon steel is malleable and has a low carbon content, which makes it more reliable. A ferrous steel is more durable and contains metals like nickel, chromium, and molybdenum, which make it a great alternative to carbon steel.
A PTO gearbox input shaft extends between the PTO gearbox and the PTO clutch. It is mounted with a toothed wheel 8. An inductive sensor 9 on the shaft outputs a pulsed electronic signal based on the rotational speed of the shaft. These pulsed signals are called inductive speed sensors.

Rotation direction

The PTO shaft is a critical part of the power take-off of a farm tractor. It allows the tractor to transfer power from the engine to an implement such as a mower or other garden equipment. The rotation direction of the PTO shaft depends on the type of implement. Some implements only accept rotation in one direction, while others require rotation in both directions.

Safety chain

Shaft CollarOne of the best ways to protect your PTO shaft is to use a safety chain. A safety chain is a chain that is attached to the PTO shaft, and it prevents the plastic shield from spinning on the shaft. This chain should be fastened to a suitable point on your machine or tractor. It should not be attached to the lower lift arms or the U-guard.
PTO shafts can be very dangerous if they are not guarded. They can rotate as high as 1000 rpm and could seriously injure you. It is also important to ensure that the PTO shaft guard is fitted correctly, and that the tractor is turned off before working on it. In addition, avoiding wearing loose clothing when working around a PTO shaft can help protect your life.
Another way to protect the PTO shaft is to shield the IID shaft. This can be done by using shielding over the straight part of the shaft, the PTO connection, or the Implement Input Connection. A protruding bolt or pin can catch clothing and snag it. If not shielded, the clothing can wrap around the shaft, trapping the person against it.
A good safety chain should be positioned between the tractor and the PTO shaft. The chain should be at least 50 mm wider than the PTO shaft, and should be in good condition. It should cover the entire length of the PTO shaft from the tractor to the first bearing. The PTO shaft must also be fitted with the correct bearing ring. It is also vital to ensure that the PTO guard does not bend or break, as this could result in damage to the PTO shaft.

Shield

Shaft CollarA PTO shaft shield protects the PTO shaft from possible impacts. It is typically made of plastic, but can also be made of metal. These shields are easy to damage, and are therefore preferably made of a durable material. The shields are held in place with brackets. The shields are made with two parts: an inner shield and a protective sleeve.
An improvement to the PTO shaft shield is a bracket that supports both the outer and PTO shaft. It is shown in conjunction with a towed machine in FIGS. 2 and 7. FIG. 7 is a side elevation of the bracket mounted to the tongue of the machine. This shield is designed to prevent the PTO shaft from becoming damaged during the towed process.
The main risk associated with PTO mishaps is entanglement, which can result in serious injuries. If a shaft separates from a tractor, it can strike nearby workers or people. Proper maintenance can minimize the risk of entanglement and save lives. Thankfully, equipment manufacturers have made huge strides in reducing the risk of these accidents. Operators should always make sure that the PTO shaft shield is in place to avoid the risk of entanglement.
In addition to preventing entanglement, a PTO shaft shield also helps protect the universal joints that are mounted on the PTO shaft. The shield is made of plastic or steel. It is typically shaped like an inverted U and covers both the top and sides of the shaft. A detachable PTO shaft shield is also available.
As with all parts of a PTO driveline, the PTO shaft shield should be maintained to prevent damage to the bearings. It is necessary to inspect the shield and replace it whenever it becomes damaged. PTO equipment is often used outdoors, and it is frequently exposed to crop debris, rust, and dirt that can affect the bearings. Proper maintenance will extend the equipment’s lifespan and reduce maintenance costs.
China Factory Custom OEM Forland 3000L 4000L Septic Suction Truck Price From China     pto shaft clutchChina Factory Custom OEM Forland 3000L 4000L Septic Suction Truck Price From China     pto shaft clutch
editor by czh 2023-01-09