We – EPG Group the most significant gearbox & motors , torque limiter couplings and gears factory in China with 5 different branches. For a lot more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
Our firm will provide you the substantial quality proWhen a torque overload takes place, the transmitted torque will exceed the set torque level of the Torque Limiter. When this takes place, the frictional force is no longer sturdy enough to transmit the torque from the driving shaft to the driven member, and the driven member slips in between the friction disks. When the torque overload is taken out, the Torque Limiter immediately resets and resumes transmitting torque.ducts with a low cost, swift shipping,and expert right after-sale services.
XCMC original manufacturer 50ton hydraulic cell truck crane QY50KA
Product Information
The progressive jib system of EPT QY50KA 50t truck crane adopts embedded block, plug-in increase head and global advanced U section jib, which has exceptional lifting efficiency and protected and reliable lifting function.
• The special extend and retract approach avoids the bend of the main pipe and cylinder and the break of the increase brought on by misoperation, enhancing the safety of the operations.
• Eight patent strategies guarantee the sleek, higher performance and energy conservation of the lifting, rotation, and luffing programs.
• Undertake the new hydraulic motor with massive torque starting position, ma ept the secondary lifting safer.
• The torque limiter adopts colorful Lcd screen, recognizing the intelligence of the failure diagnosis. The precision is in advance of the industry.
• The humanity design can make the taxi and handle taxi more roomy, and easy to run.
• 6 exclusive producing systems make sure the substantial quality.
Far more models for sale
Dimension |
Device |
QY50K-II |
---|---|---|
General size |
mm |
13750 |
Total width |
mm |
2800 |
All round peak |
mm |
3520 |
Weight |
|
|
Whole excess weight in travel |
kg |
41000 |
Entrance axle load |
kg |
15000 |
Rear axle load |
kg |
26000 |
Electricity |
|
|
Motor model |
|
WD615.334(domestic III) |
Motor rated electricity |
kW/(r/min) |
247/2200 |
Engine rated torque |
N.m/(r/min) |
1350/1400 |
Journey |
|
|
Max. vacation pace |
km/h |
80 |
Min. turning diameter |
m |
24 |
Min. ground clearance |
mm |
291 |
Strategy angle |
° |
seventeen |
Departure angle |
° |
eleven |
Max. grade capability |
% |
40 |
Gas use for 100km |
L |
forty five |
Major functionality |
|
|
Max. rated overall lifting capacity |
t |
fifty |
Min. rated wor ept radius |
m |
three |
Turning radius at turntable tail |
m |
three.482 |
Max. lifting torque |
kN.m |
1764 |
Base increase |
m |
11.three |
Totally prolonged boom |
m |
42.7 |
Completely prolonged boom+ jib |
m |
57.7 |
Longitudinal outrigger span |
m |
5.91 |
Lateral outrigger span |
m |
6.nine |
Wor ept pace |
|
|
Increase luffing time |
s |
88 |
Increase full extension time |
s |
a hundred and eighty |
Max. swing velocity |
r/min |
≥2. |
Max. speed of primary winch (one rope) (no load) |
m/min |
≥110 |
Max. velocity of aux. winch (single rope) (no load) |
m/min |
≥110 |
one. Total Lifting load for principal boom
2. Overall Lifting load for secondary boom
Company profile
EPT is a construction equipment producer with over 70 several years of experience. More than the many years, we have grown to grow to be the world’s most comprehensive development equipment producer and influential multinational organization. In 2015, we rank No.1 in China and No. 5 in world-wide weighty gear sector.XCMG’s construction equipment addresses an astonishing range of products, which includes cranes, earth-moving machinery, highway equipment, excavators, concrete machinery, mining equipment, piling machinery, lumber equipment, fireplace-preventing equipment, hefty vehicles, sanitation machinery, agricultural equipment, and a lot more. We have the world’s most comprehensive item line, and offer clients complete answers for building tools. Our other firms incorporate finance, leasing, and remanufacturing.
At existing, the electricity of my firm’s straight-arm crane is completely from the hydraulic oil pressure, that is, by means of the large-stress hydraulic oil to advertise the cylinder piston reciprocating movement, or drive the hydraulic motor rotation tends to make the hydraulic winch and rotary mechanism rotation.
So, how do large-pressure hydraulic oil get? Every single truck crane is outfitted with a hydraulic pump when the motor vehicle chassis is matched, and the motor supplies energy for it. The chemical power of the fuel can be transformed into the crankshaft of the engine to rotate the mechanical strength, and then the gearbox equipment is rotated, and then the power is transmitted to the hydraulic pump via the energy transmission of the gearbox. As a result, the hydraulic pump can continuously pressurize the hydraulic oil For the large-force hydraulic oil, so as to give electricity for the crane to attain the lifting of the goods.
Competitive Advantage
My firm’s straight arm crane crane covers 1-25 tons 14 designs sixty five varieties of goods, to satisfy a variety of circumstances, with the longest arm of the biggest tonnage crane mature manufacturing technology, scientific analysis and advancement process, sophisticated Research and growth technology, and consistently have new products to market place, to fulfill customer use.
My firm’s increase arm part with mature pentagonal, hexagonal and octagonal, the newest era of items with U-shaped arc arm body weight reduction, arm width of a large deflection, security and resistance to deformation Capacity to enhance, drastically increase the lifting ability.
The software of the sub-arm, sub-winch and vice-hook supplies a basis for the fast and massive-scale procedure of the crane light-weight load and the higher-altitude operation. The application of automatic hook engineering will save time and work when commencing and ending crane functions, ma ept it effortless to run easily.
Our firm will provide you the higher top quality goods with a low cost, fast shipping and delivery,and skilled following-sale support.
FAQ
1: What kind conditions of payment can be accepted?
A: For conditions of payment, L/C, T/T, D/A, D/P, Western Union (can be) could approved
two: What certificates are obtainable in Machinery?
A: For the certificate, we have CE, ISO, Gost, EPA(United states of america)CCC,
three: What about the shipping time?
A: 30 times following obtaining the deposit.
four: What about the warranty time?
A: 12 months soon after cargo or 2000 wor ept several hours, whichever occuts initial.
The use of first equipment manufacturer’s (OEM) portion quantities or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating product use and compatibility. Our firm and the outlined alternative areas contained herein are not sponsored, approved, or created by the OEM.